DeFelsko PosiTector DPM v.3.1 Full Manual - Manual (Page 15)

12
Selects display brightness (Sun, Normal or Night). All settings will
dim slightly after a period of no activity to conserve battery life.
Press the Down button to brighten the display.
Backlight (Advanced models only)
All batches are date-stamped when created, and all datasets are
time-stamped (24 hour format) when stored into memory. It is
therefore important to keep both the date and time current using
this menu option. Use the Up and Down buttons to scroll, and the
(-) and (+) buttons to adjust a value. The Gage’s date and time
can also be viewed in Gage Info (pg. 11).
Set Clock
White on Black
Inverts the LCD display to white on a black background to provide
better readability in some surroundings.
(Advanced models only)
This option causes the display to rotate 180°. Ideal for right-side-
up viewing when the sensors are pointed away from the user.
Flip Display
Wet Bulb
Displays the wet bulb temperature (Tw) on the main screen. It is
calculated from Ta and RH using an air pressure of 1.0
atmospheres (1013 mbar). Variations of Tw at other pressures
could be greater than ±1°C (±2°F).
This menu item only appears when all memory functions
are turned off. Wet Bulb readings cannot be stored in memory.
NOTE:
(Advanced models only)
Displays a real-time graph of the readings over
the last three minutes. Use Trend Charts to
monitor short-term environmental changes and
spot trends.
Press the Up button to scroll through
the trend charts from the main screen.
Trend charts can only be displayed
when memory is off.
Trend Chart
Shortcut:
(Advanced models only)
NOTE: