DeFelsko PosiTector DPM v.3.1 Full Manual - Manual (Page 19)

16
- Remove the last dataset from the current open batch by
pressing (-).
- Batches can be renamed in the Gage using PosiSoft.net
NOTES:
Below is a PosiTector DPM sample screen with:
- Memory mode on with one batch
containing nine saved datasets
- Chart of saved Ta, Ts, and Td
readings displayed
- White on Black mode (pg. 12)
- Readings in Celsius (°C)
- Full Battery
S c r e e n C a p t u r e
Press both (-)(+) buttons at any time to capture and save an
image copy of the current display. The last 10 screen captures
are stored in memory and can be accessed when connected to
a computer (see PosiSoft USB Drive pg. 21).
Summaries (Advanced models only)
Displays a summary of all stored
batches including the name, probe
type, number of readings and type.
In the following example, Batch 3
(B3) indicates an “F” 6000 coating
thickness probe was used to record a
total of “6” readings in “PA2” mode.