Avigilon GE Facility Commander Wnx Integration - Manual (Page 5)

Avigilon Control Center System Integration Guide with GE Facility Commander Wnx
2
Installation
Server
Install the following on any server in your network. Only the FCWnx API software and the Avigilon
FCWnx Gateway software integration need to be installed on the same server:
1. The Facility Commander Wnx Server software.
2. The Avigilon Control Center Server software.
3. The FCWnx API software
4. The Avigilon FCWnx Gateway software integration
Client
Install the following as needed:
• Install the Facility Commander Wnx Client software on the computers that require
access to the FCWnx system
• Install the Avigilon Control Center Client software on the computers that require
access to the Avigilon Control Center System
Checking the License
After you have installed all the required software, check that the licenses were properly applied.
To check the Avigilon Third Party Integration License ( ACC-GEFCWNX-NVR):
1. Open the Avigilon Control Center Admin Tool.
2. Select the Settings tab and click Licensing. The License Activation dialog box
appears.
The dialog box must say Integration Connections: Yes or the software was not properly
licensed.
To check the FCWnx API Connectivity License ( WXSWOPT-001APC):
1. In the FCWnx software, select Help > About this application.
2. Ensure the license appears in the application details.