Installation, Upgrading from avigilon control center 4, Server – Avigilon Stentofon AlphaCom Integration User Manual
Page 5: Upgrading from avigilon control center 4 server
Avigilon Control Center 5 System Integration Guide with STENTOFON AlphaCom
2
Installation
Upgrading from Avigilon Control Center 4
If you are upgrading to this version of the Avigilon Stentofon integration software, be
aware that this version of the integration is only compatible with Avigilon Control Center
5.
NOTE: To preserve all of your current integration settings, you must upgrade to Avigilon
Control Center 5 and make sure all servers in the Site can be accessed by the
integration. If a server is offline or inaccessible to the integration during the
upgrade, the integration settings for that server are lost.
It is recommended that you back up a copy of all the alarm mappings before you upgrade
the integration. The backup file for all previous versions of the integration software is
called
GatewayParams.xml
. Be aware that the backup file from this version onwards is
called
StentofonAlarmConfig.xml
. Make sure the backup file is labeled correctly when
you import it into the integration. For more information, see Backing Up Mapped Alarms
on page 8.
Avigilon Control Center 5 provides the ability to organize multiple servers into Sites and
share settings between servers. To use this feature effectively, you must upgrade all
servers in your Site before upgrading the integration. Once upgraded, you only need to
add one server from the Site to the integration to access all servers and cameras in the
Site.
NOTE: You must upgrade all servers in your Site before upgrading the integration or all of
the previous mappings may be lost.
When you upgrade the integration, the installer will shut down the integration Windows
service. After the upgrade is complete, click Update Service in the Configuration Tool to
restart the integration. To confirm that the integration has been configured correctly, see
Avigilon Stentofon Gateway on page 6.
Server
Install the following on any server that has access to an AlphaCom server through your
network.
1.
The Avigilon Control Center Server software.
2.
The Avigilon Stentofon Gateway software integration