Avigilon AMAG Symmetry 7 Integration - Manual (Page 14)

Avigilon Control Center 5 System Integration Guide with AMAG SMS
10
Mapping Alarms
In the Configuration Tool is a list of all the current alarm mappings, and all the available
alarms from the Avigilon Control Center software and the SMS software.
If the Configuration Tool is not already open, select All Programs > Avigilon > Avigilon
AMAG SMS Gateway > Configure Avigilon to AMAG SMS Gateway.
To map alarms together, complete the following steps:
1. In the AMAG SMS area, set the device commands that will trigger an SMS
alarm for the integration.
The SMS software is pre-configured with a set of commands for the devices in
your security system. For a detailed list of the available commands, see the
Security Management System Online Help for more information.
a. In the Where drop down list, select the device that this alarm will link to.
b. In the What drop down list, select the command that triggers this alarm.
c. If there is a user or role that needs to be associated with the alarm, the
Who drop down list will auto-populate with the available options.