Programming ptz tours – Avigilon ACC Standard Web Version 5.2 User Manual
Page 36
Avigilon Control Center Standard Web Client
28
3. Click to stop recording the pattern.
To activate a PTZ pattern
In the PTZ controls pane, select a pattern number
and click .
The pattern will repeat until the pattern is stopped
or another pattern is run.
To activate a PTZ tour
In the PTZ controls pane, select a tour number and
click .
The tour will repeat until stopped or until other PTZ
controls are used.
To activate an auxiliary command
1. Select an aux command number and click .
2. Click to turn off the auxiliary output.
To display the PTZ camera onscreen
menu
1. Click .
2. To move through the menu options, click any of
the following:
o
Click to move down the options.
o
Click to move up the options.
o
Click to confirm your selection.
o
Click to cancel your selection.
To lock the PTZ controls
Click
.
No other user will be able to use the PTZ controls
for this camera until you unlock the controls or log
out.
Programming PTZ Tours
If the PTZ camera supports guard tours, the tours can be programmed through the PTZ controls
pane. Tours allow the PTZ camera to automatically move between a series of preset positions,
and can be set to pause at each preset for a specific amount of time for video monitoring.
1. Create all the PTZ presets you need for this tour.
2. In the PTZ Controls pane, select a tour number then click
. The Edit PTZ Tour dialog box is
displayed.