Avigilon ACC Core Web Version 5.2 - Manual (Page 25)

Video
17
To program a PTZ preset
1. Move the camera's field of view into position.
2. In the Preset drop down list, select a number then
click .
3. In the dialog box, enter a name for the preset.
4. Select the Set as home preset check box if you
want this to be the camera's Home preset.
5. Click OK .
To activate a PTZ preset Select a preset then click .
To return to the Home preset position
If the PTZ camera supports a Home preset
position, click to return the camera to its Home
position.
To program a PTZ pattern
1. In the PTZ controls pane, select a pattern number
and click .
2. Use the PTZ controls to move the camera and
create the pattern.
3. Click to stop recording the pattern.
To activate a PTZ pattern
In the PTZ controls pane, select a pattern number
and click .
The pattern will repeat until the pattern is stopped
or another pattern is run.
To activate a PTZ tour
In the PTZ controls pane, select a tour number and
click .
The tour will repeat until stopped or until other PTZ
controls are used.
To activate an auxiliary command
1. Select an aux command number and click .
2. Click to turn off the auxiliary output.
To display the PTZ camera onscreen
menu
1. Click .
2. To move through the menu options, click any of
the following:
o Click to move down the options.