Avigilon ACC Core Web Version 5.2 - Manual (Page 22)

Avigilon Control Center Core Web Client
14
The image panel immediately plays back the camera's most recently recorded video.
Triggering Manual Recording
Cameras are set to follow a recording schedule. If an event occurs outside the camera's
recording schedule, you can click the record indicator icon to force the camera to record the
event.
Here are the camera recording states:
Recording Recording triggered by an event Not recording
Starting and Stopping Manual Recording
In an image panel that is displaying video, perform either of the following:
 In the top-left corner of the image panel, click to start manual recording.
The record indicator is highlighted to show that the camera is recording. Manual
recording continues until it is stopped, or until the maximum manual recording time is
reached.
 Click to manually stop video recording.
PTZ Cameras
PTZ cameras can be controlled through the image panel onscreen controls or by using the tools
in the PTZ Controls pane.
Be aware that some of tools and features may not be displayed if they are not supported by your
camera.
Controlling PTZ Cameras
Pan, Tilt, Zoom (PTZ) controls allow you to control cameras with PTZ features. You can control a
PTZ camera by using the onscreen controls or by using the tools in the PTZ Controls pane.
1. In the toolbar, click . The PTZ controls are now enabled in the image panels that are displaying
PTZ video.