Avigilon ACC Core Web Version 5.2 - Manual (Page 23)

Video
15
2. In the image panel, click .
The PTZ controls are displayed in a floating pane immediately beside the image panel.
Note: The controls may appear different depending on the camera. Some options are
disabled or hidden if they are not supported by the camera.
Figure A. PTZ controls
3. To pan or tilt, perform one of the following:
o In the image panel, drag your mouse from center to move the camera in that
direction. The farther the cursor is from the center of the image panel, the faster
the camera will move.
o If the camera supports Click to Center, click anywhere on the image panel to
center the camera to that point.