Work Sharp WS3000 Tool Bar Attachment - Manual (Page 5)

(5) Freehand Topside
(6) Freehand Underside
The Tool Bar can be placed under the grinding
wheel on the back side of the machine. This
provides a stable tool rest for improved
precision.
When sharpening curved tools, use the
Edge-Vision® slotted wheel see through wheel and
abrasives.
The tool bar can be placed at various positions and
heights for topside freehand sharpening.
A Set the tool bar to desired height and orientation
to the grinding wheel.
B Set the tool stick out on tool rest so the bevel
angle matches that of your tool.
When holding the tool, your hand (fingers) can be used
to create a tool stop against the tool bar while
sharpening.
Tip: You can also scribe or mark a line onto your tool to
identify the Tool Stick Out and record the Height setting
for repeatable future sharpenings.
Edge-Vision® Slotted Wheel