Work Sharp WS3000 Tool Bar Attachment - Manual (Page 12)

Skew Chisel
(13) Multi Jig Tormek® SVS-50 with Skew Chisel
Use Skew Tool fixture when sharpening
Skew Chisel
See Skew Chisel Set Up Chart (Section
10) for preset grind angles.
Or set the TSO and H to match the existing angle.
Record on the Data Chart in section 7.
Technique:
Sharpen each bevel equally for best results and a
centered cutting edge.
Maintain firm downward pressure on the tool to prevent
the tool from moving during sharpening.
Sharpening one bevel into the wheel and the other bevel
away from the wheel does not impact the sharpness or
performance of the tool. This method is safe and creates a
very sharp skew chisel.