Work Sharp WS3000 Tool Bar Attachment - Manual (Page 11)

Parting Tool
(12) Multi Jig Tormek® SVS-50 with Parting Tool
Use Vee Plate fixture when sharpening
Parting Tools
See Parting Tools Set Up Chart
(Section 10) for preset grind angles.
Or set the TSO and H to match the existing angle.
Record on the Data Chart in section 7.
Technique:
Set the edge of the Parting Tool flush onto the grinding
wheel. Hold firm to avoid movement.
Lift tool every few seconds and allow metal to cool before
reapplying.
Once fully sharpened, flip the tool over and sharpen the
other edge.