Ventamatic EC36D1 Manual - Manual (Page 9)


Problem (continued)
5. Scale build-up on cooling pads.
Cause (continued)
Hard water with excessive mineral content.
Solution (continued)
Use Evapo-O-Matic Tablets or add a Water
Stabilizer at the discharge side of the pump.
Flush water from unit’s water reservoir more
frequently. See section 7.4.
8.0 Storage
Remove pads as described above in 7.2 and rinse pads clean with fresh water. Dry cooling pads in sunlight. Drain water
reservoir completely and wipe dry. Replace dry cooling pads. Replace top angle bar to hold pads in place. Store MaxxAir
in dry, clean area and cover to prevent dust build up to have unit ready for the next hot season.
9.0 Wiring Diagrams for all 36” units