Triton RL5000 User Manual - Manual (Page 62)

4 2
M
ODEL
RL5000 S
ERIES
U
SER
M
ANUAL
Loading Note Cassettes
Follow these steps to load the cassette with
notes. When loaded, the notes must lean
evenly against the packer plate.
IMPORTANT : The shape of some notes
may be affected by conditions of storage or
bundling, preventing them from forming neat
even piles. If not corrected, such conditions
may cause notes to be rejected by the dis-
pensing mechanism. To compensate for the
most common conditions of slanting or
cupped note piles, follow the directions
given here. Notes with no apparent shape
problems are referred to as “common” notes.
• Slanting pile
To avoid dispensing problems caused by a
“slanting” pile, put the notes in neat bundles
of no more than 1 to 2 inches in thickness.
Turn every other bundle around to mini-
mize slanting of the pile.
• Cupped bundle
To avoid dispensing problems caused by
cupped bundles, turn all the bundles with
the cupped side towards the dispense open-
ing (the “feed” end of the cassette).
Alternate slanted note piles.
• Common notes
Place the prepared bundles in the cassette.
Follow these steps to load notes in the cas-
sette:
1. Level the note pile. Compress the note
pile slightly by hand. Single notes must
not protrude from the bundle. Make
sure the bundle leans evenly against
the note plate.
Cupped bundles face dispense
opening.
Cupped bundles face dispense
opening.
Level the note pile.