Triton RL5000 User Manual - Manual (Page 59)

3 9
C
URRENCY
H
ANDLING
• Cupped bundle
To avoid dispensing problems caused by
cupped bundles, turn all the bundles with
the cupped side towards the dispense
opening of the note cassette (opposite
end from the handle).
• Mixed (Slanting and Cupped)
bundles
Separate the mixed currency into neat
bundles of 100-200 notes of each type. Place
the cupped bundles nearest the dispense
opening of the cassette, with the cupped
side facing the opening. Turn every other
slanted bundle around to give the bundles
the same height on both sides and place after
the cupped bundles.
• Old and New Notes
Always place the bundles containing old
notes into the cassette first (nearest the
handle) and bundles containing new notes
last (nearest the dispense opening).
Turn cupped sides toward dispense
opening.
Dispense
opening.
Place old notes together.
• Common notes
Simply place the prepared bundles in the
cassette.
3. Make sure the note pile is as even as
possible. If necessary, use your hands
to smooth and level the pile.
4. On cassettes that do not use a pusher-
plate locking mechanism, release the
pusher plate against the notes. If the
cassette uses pusher-plate locking, turn
the key to release the catch, allowing
the pusher plate to compress the notes.
Load notes.