Triton RL2000 User Manual - Manual (Page 34)

30
M
ODEL
RL2000 U
SER
M
ANUAL
O
PENING THE
R
EJECT
V
AULT
The reject vault is locked when it is removed from the dispenser . A color indicator window shows GREEN
when the vault is opened for collection and when it is ready for use. This condition is also referred to as the
PRIME position of the color window.
The color window shows RED when the vault is inserted into the dispenser and will show
RED
until it has
been removed from the dispenser and opened for collection.
Remove the vault seal (if applicable). Turn the small handle on the front counterclockwise and lift the lid.
Release the handle. Collect the rejected notes.
C
LOSING THE
R
EJECT
V
AULT
After removing any rejected notes, turn the small handle about a half-turn counterclockwise and close the
lid. Allow the handle to return to the position of the seal bracket. At this point, the vault is primed and the
color window should be showing GREEN. If applicable, apply a new vault seal and lock the small handle to
the seal bracket.
Open reject vault top.
I NSTALLING THE R EJECT V AULT
Slide the reject vault back into its slot in the mechanism. Make sure the vault is fully inserted. Close and lock
the security container.