Triton RL2000 User Manual - Manual (Page 22)

18
M
ODEL
RL2000 U
SER
M
ANUAL
C
ASSETTE
C
LOSE
P
ROCEDURES
Follow Access instructions to enter M
ANAGEMENT F UNCTIONS
. Select T
ERMINAL C LOSE F UNCTIONS
. Select
C ASSETTE C LOSE
.
Select cassette(s) to Close. A check mark ( √ )
identifies which cassette(s) are selected. Press
.
A Close report is displayed to be printed or
saved. This operation will reset the number of bills
in the cassette(s) to ZERO (0). Press .
Remove and Replenish the selected cassette(s).
Note: If an NMD-50 dispenser is installed, wait for the
cassettes to UNLOCK (this is done automatically).
After cassette(s) have been reinserted in the
dispenser, press .
Note: If an NMD-50 dispenser is installed, wait for the
cassettes to LOCK (this is done automatically). Press
if applicable.
P lace selected cassette(s) IN SERVICE. Press
.
Note: The NMD-50 cassettes Must be Locked
and In Service for normal operation.
Enter Cassette Quantity (number of notes, NOT
value) for the selected cassette(s). Press
to accept entry. Repeat for each selected cassette.
A Trial Cassette Close report automatically is
displayed to be printed or saved. Print and retain a
copy for starting point reference. Press to
return to Close functions.
Procedures for cassette replenishment are
on the following pages.