Triton RL1600 User Manual - Manual (Page 25)

19
C
ASSETTE
C
LOSE
/ C
ASH
R
EPLENISHMENT
Replenish Cassette
Mech 10 (MiniMech)
Load note tray with currency.
3. Add the number of bills being placed
into the cassette to the number that re-
mained. The “Total” number of these
bills will be entered in the “Enter Cas-
sette Quantity” option.
2. Count the number of bills that remain in the cassette, if any. Next, count the number
of bills that are being added into the cassette.
1. Move the pusher plate to the rear of the tray (toward the handle). Ensure the pusher
plate is fully back. Maintain pressure on the pusher plate as needed while loading
notes.
Loading the Note Tray
Note: You may wish to record the number of notes removed from the reject compart-
ment for use when balancing the note tray against the cassette/day close records.
Removing note tray from the dispensing
mechanism.
Removing rejected notes.
3. Remove any rejected notes. The reject compartment is located nearest the handle
side of the tray.
2. To remove the note tray, grasp the tray handle and slide the tray out of the mecha-
nism. Place note tray on a fl at level surface.
1. Unlock and open the security cabinet door.