Triton RL1600 Installation Manual User Manual

Page 25

rl1600 i

nstallation

anual

POWER SUPPLY CORD -

SPECIFICATIONS

For European applications, the

power supply cord must conform to

the following specifications:

1. Two-conductor with Physical

Earth (PE) ground.

2. IEC 320 molded connector on

one end and molded plug on

the other end.

3. Certified for country of

installation.

4. Rated minimum H05VV-F with

minimum 0.75 mm2 (except

where specific countries

require 1.0 mm2) conductors.

5. Maximum length: 3 meters.

Power Outlet Accessibility

Whether you are installing a new AC socket outlet or plan to use an existing

outlet to supply power to the ATM, make sure the following requirements

are met:

1. The outlet is located near the equipment. Extension cords are not recom-

mended.

2. AC power for the terminal should come from a dedicated source with an

isolated ground. The ATM is designed to work on an IT (Isolated-Terra)

type power system having a phase-to-phase voltage not exceeding 240

volts.

3. The outlet is easily accessible and will not be blocked once the equipment

is installed and anchored.

REFER TO THE USERS MANUAL

AND CONFIGURATION MANUAL

FOR OPERATIONAL

INSTRUCTIONS

NOTE:

IT MAY TAKE UP TO 30 SECONDS

FOR THE DISPLAY TO ILLUMI-

NATE, AND ANOTHER 15 SECONDS

FOR THE OS TO LOAD