Tele Vue Air-Chair User Manual
Air-chair instructions, Tele vue
AIR-CHAIR INSTRUCTIONS
Parts List:
1) Air-Chair Leg Assembly
2) Seat Cushion
Introduction:
The Tele Vue Air-Chair will add a new dimension to
your observing sessions - comfort. Being able to sit and
relax, you'll spend more time at the eyepiece observing
objects longer and probably noticing more detail!
The pneumatic piston adjustment allows quick and
easy repositioning of Air-Chair for different observing
heights and for different observers. Seat height can be
adjusted from 20½" to 28" to achieve the most comfortable
viewing position.
Use Air-Chair on any surface. The thick rubber foot
pads prevent scratched floors while they also protect the
bottom of Air-Chair’s legs during field use.
Setup & Use:
1) Attach Seat Cushion
Seat Cushion
Seat Cushion
Seat Cushion
Seat Cushion to Tripod Legs
Tripod Legs
Tripod Legs
Tripod Legs
Tripod Legs - Remove 4 Wing
Wing
Wing
Wing
Wing
Screws
Screws
Screws
Screws
Screws from the Seat Cushion
Seat Cushion
Seat Cushion
Seat Cushion
Seat Cushion. Position the threaded holes
in the bottom of the Seat Cushion
Seat Cushion
Seat Cushion
Seat Cushion
Seat Cushion in-line with the clearance
holes in the metal plate attached to the Tripod Legs
Tripod Legs
Tripod Legs
Tripod Legs
Tripod Legs.
2) Thread the 4 Wing Screws
Wing Screws
Wing Screws
Wing Screws
Wing Screws back into the Seat Cushion
Seat Cushion
Seat Cushion
Seat Cushion
Seat Cushion
to tie it in place.
3) Set up Tripod - After removing all packaging, spread the
Tripod Legs
Tripod Legs
Tripod Legs
Tripod Legs
Tripod Legs apart so that the Lower Leg Tie
Lower Leg Tie
Lower Leg Tie
Lower Leg Tie
Lower Leg Tie bottoms on the
Piston Housing
Piston Housing
Piston Housing
Piston Housing
Piston Housing. Tighten Tripod Lock Screw
Tripod Lock Screw
Tripod Lock Screw
Tripod Lock Screw
Tripod Lock Screw.
4) Seating Position - Sit on Air-Chair with the Height
Height
Height
Height
Height
Adjustment Handle
Adjustment Handle
Adjustment Handle
Adjustment Handle
Adjustment Handle within comfortable reach. To raise the
seating position, lift your weight off the Seat Cushion
Seat Cushion
Seat Cushion
Seat Cushion
Seat Cushion and
pull UP on the Height Adjustment Handle
Height Adjustment Handle
Height Adjustment Handle
Height Adjustment Handle
Height Adjustment Handle. Release the
Height Adjustment Handle
Height Adjustment Handle
Height Adjustment Handle
Height Adjustment Handle
Height Adjustment Handle when you reach the desired
height.
To lower the seating position, simply pull UP on the
Height Adjustment Handle
Height Adjustment Handle
Height Adjustment Handle
Height Adjustment Handle
Height Adjustment Handle and your weight will lower the
seating position. Release the Height Adjustment Handle
Height Adjustment Handle
Height Adjustment Handle
Height Adjustment Handle
Height Adjustment Handle
when you reach the desired height.
Maintenance
The air piston is completely sealed and requires no
maintenance. The performance of the piston can be
affected by operating in temperatures below 20° F. It is
important for the longevity of the piston that the Air-Chair
be used and stored in temperatures above 20° F.
32 Elkay Dr., Chester, New York 10918 (845) 469-4551 televue.com
Tele Vue
®
V i s i o n a r y
Wing
Wing
Wing
Wing
Wing
Screws
Screws
Screws
Screws
Screws
in 4 places
in 4 places
in 4 places
in 4 places
in 4 places
Height Adjustment
Height Adjustment
Height Adjustment
Height Adjustment
Height Adjustment
Handle
Handle
Handle
Handle
Handle
Seat Cushion
Seat Cushion
Seat Cushion
Seat Cushion
Seat Cushion
Piston Housing
Piston Housing
Piston Housing
Piston Housing
Piston Housing
Tripod Legs
Tripod Legs
Tripod Legs
Tripod Legs
Tripod Legs