Tele Vue LMF-2405 - Manual

INSTRUCTIONS LMK-2404/LMF-2405
Parts List:
Digital Indicator Kit
LMK-2404/LMF-2405
- Digital Indicator
- Indicator Dovetail
- Dovetail Channel
- Indicator Stop
- Indicator Stop Bracket
- (2) Phillips Head Screws
- (1) Stop Bracket Screw
- (3) Allen Keys
Installation
Step 1) Remove the button
head screw from the notch
at the top of the focuser end
ring.
Step 2) Set the Stop Bracket
into the notch and secure
with the new button head
screw provided.
Step 3) Thread the Indicator
Stop into the stop bracket.
Step 4) Remove the two but-
ton head screws from the top
of the focuser body.
Step 5) Place the Dovetail
Channel over the focuser body
as shown and secure it using
the two phillips head screws.
Step 6) Slide the Indicator
Dovetail onto the back of
the Digital Indicator and lock
in place using the small Allen
key.
Step 7) Slide the Indicator
into the Dovetail Channel.
Proceed with the adjustment
instructions, or lock the indi-
cator in place.
Adjustment and Use
The Digital Indicator has a
0.5" travel range. In order
to effectively use the indica-
tor, it is ideal to set the shaft
within the middle of its travel
range.
To do so: achieve a
rough focus with your tele-
scope. Slide the indicator
against the stop until the
shaft has moved approxi-
mately half way through its
travel. Use the small Allen
key and tighten the two set
screws on the side of the
Dovetail Channel that con-
tact the indicator Dovetail.
Turn the micrometer on
and zero it if necessary
Start critically focusing
the image. Take note of the
micrometer reading so you
may return to that position if
further adjustment does not
improve focus.
Details regarding the
use of the indicator can be
found on the instructions in-
cluded with the unit.
The optional RSC-2320
cable plus TVFocus software
(download available at
www.TeleVue.com) permits
remote viewing of the
indicator's reading.
32 Elkay Drive, Chester, New York 10918 845.469.4551 www.televue.com
Digital Indicator
Stop
Bracket
Stop
Dovetail
Channel
Indicator
Dovetail
Step 1
Step 2
Step 3 & 4
Step 5
Step 6
Step 7
Remove