Tele Vue Questar Eyepiece Adapter (AQE-0005) - Manual

(AQE-0005) QUESTAR EYEPIECE ADAPTER
Installation and use of the Installation and use of the Installation and use of the Installation and use of the Installation and use of the
Questar Adapter is simple. Questar Adapter is simple. Questar Adapter is simple. Questar Adapter is simple. Questar Adapter is simple.
Please read the following Please read the following Please read the following Please read the following Please read the following
instructions. instructions. instructions. instructions. instructions.
Dear Questar Owner,
Your new Tele Vue 1 ¼” Questar
Adapter welcomes you to
whole new fields for you and
your Questar to explore.
1. Unscrew the stock threaded
Questar eyepiece adapter and
replace with the Tele Vue
Questar Adapter. Adapter only
needs to be snug, do not
overtighten.
2. Slip any 1 ¼” eyepiece into
the adapter and lock the set
screw.
3. Keep the black focus adjust-
ment ring within the midpoint
of its thread range. This allows
you to easily focus with the
viewfinder optics. After focus-
ing, place the eyepiece lock
screw in the more convenient
of the two tapped holes in the
focus adjustment ring.
WARNING: The diopter ad-
justment ring is not meant to be
bottomed against the aluminum
barrel. Doing so may prevent
your eyepieces from slipping
into the adapter.
Clear Skies.
32 Elkay Drive, Chester, New York 10918 845.469.4551 www.televue.com
(AQE-0005) QUESTAR EYEPIECE ADAPTER
Installation and use of the Installation and use of the Installation and use of the Installation and use of the Installation and use of the
Questar Adapter is simple. Questar Adapter is simple. Questar Adapter is simple. Questar Adapter is simple. Questar Adapter is simple.
Please read the following Please read the following Please read the following Please read the following Please read the following
instructions. instructions. instructions. instructions. instructions.
Dear Questar Owner,
Your new Tele Vue 1 ¼” Questar
Adapter welcomes you to
whole new fields for you and
your Questar to explore.
1. Unscrew the stock threaded
Questar eyepiece adapter and
replace with the Tele Vue
Questar Adapter. Adapter only
needs to be snug, do not
overtighten.
2. Slip any 1 ¼” eyepiece into
the adapter and lock the set
screw.
3. Keep the black focus adjust-
ment ring within the midpoint
of its thread range. This allows
you to easily focus with the
viewfinder optics. After focus-
ing, place the eyepiece lock
screw in the more convenient
of the two tapped holes in the
focus adjustment ring.
WARNING: The diopter ad-
justment ring is not meant to be
bottomed against the aluminum
barrel. Doing so may prevent
your eyepieces from slipping
into the adapter.
Clear Skies.
32 Elkay Drive, Chester, New York 10918 845.469.4551 www.televue.com