Star Water Systems S15DC39DR - Manual (Page 7)

7
© Copyright 2011 Star Water Systems. All rights reserved.
STAR WATER SYSTEMS | 95 North Oak St. | Kendallville, IN 46755 | starwatersystems.com
EASY INSTAllATION INSTRuCTIONS
7. Install 1/2” ID tubing (included) to the overflow hose
barb located on the side near the back of the softener
cabinet and run to a suitable drain. Do not connect to
drain line off of softener.
8. Typical finished installation using rigid copper pipe.
9. Slowly open main water supply shut-off valve. CHECK
FOR LEAKS! Close previously opened faucet (item 2,
page 6) after air has stopped coming out of faucet.
10. Draw a 5 gallon bucket of water to be used in the
brine tank.
11. Pour the 5 gallon bucket of water into the brine tank.
12. Measure 1-1/2 oz of chlorine bleach and pour solution
directly into the brine tank.