Spectra Precision Layout Pro Field Software Quick Start Guide - Manual (Page 14)

4
Entering a Plan from a Blueprint
Entering a
Basic Plan
1. From the main menu, tap Plan.
2. Tap Input Plan to begin entering your plan.
The following table shows the tools on the right side of the
window that help you work with the display plan.
3. Enter or select a line start point.
4. Enter the length of the new segment.
5. Set the direction that the line is to be placed. To do this:
– Use the rotate buttons to rotate it by a
specified angle.
– Select an angle from the drop-down list.
– Manually enter the angle.
6. Multiple segments of the same length and in the same
direction can automatically be generated. To do this, key
in the number of segments in the
Repeat field.
The and icons can also be used to increase or
decrease the number of segments.
7. After your segment, or series of segments, has been
defined, tap Enter on the screen The segment, or series of
segments, then appears on the map.
8. Define the next segments as explained above, until all the
segments have been entered (see example below).
Use this tool... to...
Select from plan
Show the whole plan
Zoom in on active point
Zoom out from active point
Zoom to select area
Set display options for labels (point names, etc.)