Clean-out instructions – SnowEx PWS-225 User Manual

Page 32

AS — 32

Clean-Out Instructions

Step 1: Disconnect nozzle assemblies at rear of vehicle at Quick-Disconnect point.

Step 2: Make yourself a hose with matching male Quick-Disconnect to hook-up at Quick-Disconnect point.

Step 3: Install hose at Quick-Disconnect point and put the other end in the storage tank.

Step 4: Turn on pump until the tank is empty.

Step 5: Add water and RV antifreeze mix into tank.

Step 6: Reinstall Quick-Disconnect from nozzle assemblies.

Step 7: Run pump until it is running clean out of each nozzle.

Model # PWS-175/PWS-225/PWS-375

This manual is related to the following products: