Seca 703 - Manual (Page 26)

26
8. Servicing
Your seca scale leaves the factory with an accuracy greater than ±0.15 % / ±100 g. To en-
sure that this accuracy is maintained, the product must be carefully set up and regularly
maintained. Depending on the frequency of use, we recommend servicing every 3 to 5
years. Please ensure that a qualified service agent is used. If in doubt, contact seca Cus-
tomer Service for further information.
Changing the batteries
When or bAtt appear in the display, you should change the batteries. You need
6 type AA 1.5 V batteries.
– Push the battery compartment closure
towards “Battery” and open the cover.
– Take out the holder and batteries.
– Remove the used batteries and insert
new batteries in the holder.
Check that the polarity is correct.
– Place the holder and batteries in the
battery compartment.
– Close the cover.
9. Technical data
Maximum load 250 kg / 550 lbs / 39 sts
Graduations
0 up to 150 kg/330 lbs:
0.05 kg/0.1 lbs
150 kg/330 lbs up to 250 kg/550 lbs: 0.1 kg/0.2 lbs
Dimensions scale
width:
360 mm / 14.2 ins
height: 930 mm / 36.6 ins
depth: 520 mm / 20.5 ins
Dimensions weighing platform
width:
350 mm / 13.8 ins
height: 84 mm / 3.3 ins
depth: 360 mm / 14.2 ins
Height of figures 25 mm
Weight approx. 16 kg
Temperature range +10 °C to +40 °C
Batteries 6 type AA 1.5 V batteries
Power supply Battery/
mains unit (option)
Power consumption approx. 25 mA