Seca 703 - Manual (Page 18)

18
Power supply
The scale is generally powered by batteries.
The LC display has a low power consumption – 16.000 weighing operations can be per-
formed with one set of batteries.
– Push the battery compartment closure
towards “Battery” and open the cover.
– Connect the cable to the holder and
batteries.
– Place the holder in the battery compart-
ment.
– Close the cover.
Note: the scale is prepared for use
with a seca mains unit which is availa-
ble as an accessory.
– The socket for connecting the mains
unit is located at the bottom of the col-
umn.
Note: the mains unit can also be used
with the batteries in place without the
scale or batteries being damaged.
4. Setting up and aligning the scale
– Place the scale on a level surface.
– Align the scale by using the foot screws.
The scale must stand securely with all
four feet on the ground.