Seca 703 - Manual (Page 20)

20
Correct weighing
– Press the Start key with no load on the
scale.
se(A , 8.8.8.8.8. and 0.00 appear con-
secutively in the display. The scale is
then automatically set to zero and ready
to use.
– If necessary, switch the weight display
(see page 20).
– Stand on the scale and keep still.
– Read the weighing result off the digital
display.
– If a load greater than 250 kg or 550 lbs
is placed on the scale, St0P appears in
the display.
Switching the weight display
With some variants of this scale, the weight display can be switched between kilo-
grammes (kg), pounds (lbs) and stones (sts).
– Switch on the scale using the green
Start key. Weight is initially displayed in
the last setting selected.
– To switch the weight display between
kilogrammes and pounds, press the kg/
lbs/sts key.
– The kg, lbs or sts display lights up.
– To switch weight display between
pounds and stones, hold down the
kg/lbs/sts key for approx. 2 seconds.
The
lbs or sts display lights up.
Automatic switch-off/economy mode
The scale automatically detects whether it is being operated on rechargeable batteries
alone or whether it is connected to the mains.
– With rechargeable battery operation: To save electricity, the scale switches itself off af-
ter a short time with no load.
– With mains operation: shut-down only via keypad.