RIKON Power Tools 25-200H - Manual (Page 2)

2
TABLE OF CONTENTS
SPECIFICATIONS
NOTE: The specifications, photographs, drawings and information in this manual represent the current
model when the manual was prepared. Changes and improvements may be made at any time, with no
obligation on the part of Rikon Power Tools, Inc. to modify previously delivered units. Reasonable care
has been taken to ensure that the information in this manual is correct, to provide you with the guidelines
for the proper safety, assembly and operation of this machine.
Motor ....................................................................................................3 HP, TEFC
Motor Speed (no load)........................................................................... 3400 RPM
Volts ............................................................................................................. 220 V
Amps, Hertz .........................................................................................12 A, 60 Hz
Cutterhead Diameter ............................................................... 2-3/4" (69.85 mm)
Cutterhead Speed (RPM / CPM).....................................4700 RPM / 18,800 CPM
Number of Carbide Inserts, 4-sided.................................................................... 56
Knife Insert Size (L x W x T) ...................................................0.59" x 0.59" x 0.10"
Maximum Depth of Cut (Planing & Jointing) .................................. 1/8" (3.18 mm)
Maximum Cutting Width (Planing & Jointing)..................................12" (304.8 mm)
Maximum Cuttng Depth (Planing Height) .....................................7-7/8” (200 mm)
Planer Table Size ...............................................20-1/4" x 12" (514.4 x 304.8 mm)
Feed Speed Planing SF/min ........................................................... 23 (7 SM/min)
Jointer Table Size ...................................................13" x 49-3/8" (330 x 1254 mm)
Fence Size ..................................................................6" x 43" (152.4 x 1092 mm)
Fence Tilting Degree ................................................................................... 0 - 45°
Dust Port ............................................................................ 4” Diameter (100 mm)
Dust Collection Minimum CFM ........................................................................ 650
Noise Level (no load) .................................................................................. ≤98dB
Overall Size (LxWxH).....................49-1/4" x 19" x 34" (1251 x 863.6 x 482.6 mm)
Base Size ...........................................................25-1/2” x 19” (647.7 x 482.6 mm)
Net Weight ....................................................................................386 lbs (175 kg)
Specifications.....................................................................................................................2
Safety Instructions ........................................................................................................3 - 6
Getting To Know Your Machine ..............................................................................................7
Contents of Package ..........................................................................................................7
Installation ......................................................................................................................8
Assembly .......................................................................................................................8 - 9
Adjustments...............................................................................................................10 - 17
Operation ..................................................................................................................18 - 20
Maintenance ....................................................................................................................21
Notes ...............................................................................................................................21
Troubleshooting .........................................................................................................22 - 23
Electricals & Wiring Diagram .......................................................................................5 & 23
Parts Explosions & Parts Lists ..................................................................................24 - 34
Warranty ..........................................................................................................................35