Mediabridge MWN-WAPR150Nv2 User Guide - Manual (Page 39)

MWN-WAPR150Nv2
34

DHCP Server: Check “Enable” to enable DHCP server.

IP Pool Start/End Address: Enter the range of IP addresses for the DHCP server
to distribute.

Lease time: The valid time of the Dynamic IP address which is distributed to the
DHCP client’s host computer by your Medialink router’s DHCP server. During this
time, the server will not distribute the IP address to any other connected device.
6.2 DHCP Client List
DHCP client list displays user device’s IP Address, MAC address, host name and other
information which are assigned by the DHCP server. You can manually enter the IP and
MAC address and convert them to static assignment.

Host Name: The name of the device whose IP is allocated by the DHCP server.
This name is generated by the device itself.

IP Address: Enter the IP address which needs static binding.

MAC Address: Enter the MAC address of the device you want to bind. Click
“Add” to add the entry in the list.

Lease time: The remaining time length of the corresponding IP address lease.