Mediabridge MWN-WAPR150Nv2 User Guide User Manual
Page 32
MWN-WAPR150Nv2
27
Example: This example shows how to bridge two MWN-WAPR150Nv2 routers.
First check the following settings:
First MWN-WAPR150Nv2 (connected to your ISP)
LAN IP Address:
SSID:
Channel:
Extension Channel:
Wireless Security:
Wireless Working Mode: WDS Bridge Mode
DHCP Server: Enabled
Second MWN-WAPR150Nv2 (used to extend your network)
LAN IP Address: 192.168.8.XXX where XXX is 2~254 (192.168.8.2 will be used in this
example)
SSID:
Channel:
Extension Channel:
Wireless Security:
Wireless Working Mode: WDS Bridge Mode
DHCP Server: Enabled (will be disabled as the last step of this configuration)
Connect the Second MWN-WAPR150Nv2 to the First MWN-WAPR150Nv2
wirelessly:
1. Click “Open Scan” and select the First MWN-WAPR150Nv2 from the list and click
the ”OK” button on the dialog box and then the corresponding wireless MAC address will
be added to the AP MAC address field automatically.