Mediabridge MWN-WAPR150Nv2 User Guide User Manual
Page 33
MWN-WAPR150Nv2
28
2. Scroll down to the bottom of the page and click “Apply” after the MAC address is
added.
Connect the First MWN-WAPR150Nv2 to Second MWN-WAPR150Nv2 wirelessly:
Repeat the steps above on the First MWN-WAPR150Nv2 to pair the two routers.
Disable DHCP on the Second MWN-WAPR150Nv2: Login to the Second
MWN-WAPR150Nv2
nd disable the DHCP Server. Click “Apply”.
Power Cycle: After you are finished, power down both devices. Then power up the First
MWN-WAPR150Nv2 first and then power up the Second MWN-WAPR150Nv2. You will
now have a stronger signal to which you can connect.
Placement: You may now unplug the power from the Second MWN-WAPR150Nv2 and
move it wherever you have an open electrical outlet. Ideally, the Medialink router should
be placed halfway between your existing router and the ultimate location you wish to
have a stronger signal.