Mediabridge MWN-WAPR150Nv2 User Guide - Manual (Page 38)

MWN-WAPR150Nv2
33

MAC Address list: Shows the added MAC addresses. You can add or delete
them.

Click “Apply” when finished.
5.4 Connection Status
This screen shows each wireless client’s connection status, including MAC Address,
Channel Bandwidth.

MAC Address: Shows the MAC Addresses of the clients connected to the router.

Bandwidth: Shows the channel bandwidth of the currently connected wireless
clients.
Chapter 6 DHCP Server
6.1 DHCP Server
DHCP (Dynamic Host Control Protocol) is used to assign an IP address to the computers
on the LAN/private network. When you enable the DHCP Server, the DHCP Server will
allocate automatically an unused IP address from the IP address pool to the requesting
computer when “Obtain an IP Address Automatically” is configured. You can specify the
start and end address of the IP Address pool here: