Mediabridge MWN-WAPR150Nv2 User Guide - Manual (Page 22)

MWN-WAPR150Nv2
17
L2TP

Mode: Shows your current connection mode.

L2TP Server Address: The IP address or domain name of the destination server
is used to specify the destination address for the L2TP connection.

Username/Password: Used to validate identity when connecting to the L2TP
server.

Address Mode: Set the router’s IP address mode. You can select either “Dynamic”
or “Static”. If your ISP does not provide the IP address, please select “Dynamic”.

IP address: Please enter the IP address provided by your ISP

Subnet mask: Please enter the subnet mask provided by your ISP, generally it is
255.255.255.0 or similar.

Gateway: Please enter the gateway provided by your ISP.

Click “Apply” when finished.
4.3 LAN Settings
Click “Advanced settings” > “LAN settings” to enter the following screen: