Mediabridge MWN-WAPR150Nv2 User Guide User Manual
Page 27
MWN-WAPR150Nv2
22
1. Enter 192.168.8.2 in the both IP address fields
2. Select upload in the Upload/Download field.
3. Enter 10-15 in the bandwidth range field
4. Select “Enable”
5. Click “Add to list”
6. Click “Apply” to finish the upload rule settings.
And then add a download rule as shown in the picture below.
1. Enter 192.168.8.2 in the both IP address fields
2. Select download in the Upload/Download field.
3. Enter 80-90 in the bandwidth range field
4. Select “Enable”