Mediabridge MWN-WAPR150Nv2 User Guide - Manual (Page 30)

MWN-WAPR150Nv2
25
Chapter 5 Wireless Settings
5.1 Wireless Basic Settings

Enable Wireless Function: Select to enable the router’s wireless features;
deselect to disable it and all functions related with wireless will be disabled.

Wireless Working Mode: This router provides two kinds of working modes:
Wireless Access Point(AP) and WDS Bridge Mode
Wireless Access Point (AP)

Network Mode: Select one mode from the drop-down list.
11b mode
：Select it if you have only Wireless-B clients in your network.
11g mode
：Select it if you have only Wireless-G clients in your network.
11b/g mixed mode: Select it if you have only Wireless-B and Wireless-G
clients in your network.
11b/g/n mixed mode: Select it if you have Wireless-B, Wireless-G and
Wireless-N clients in your network. This mode is default is
recommended since b/g/n clients will each connect at their
respective top speeds.

Primary SSID: The unique name of the wireless network which can be modified at
any time.

Broadcast (SSID): Select “Enable” to enable the router’s SSID to be detected by
wireless devices. The default is enabled. If you disable it, the wireless devices
must know the SSID for communication for it will be hidden.
 Channel: The channel currently used by the router. Select an effective channel