LumaSense Technologies M310 - Manual (Page 15)

M310 Manual Operation 15
8. Press UP to select according to chart below.
9. Press SCROLL and hold for 3 seconds to exit.
Note: It is important to lock out the controller after making setting changes to prevent
tempering.
To lock out the controller:
1. Press SCROLL for 10 seconds to enter lockout set-up again. Display will show AcLu and
FACt.
2. Press UP until USEr appears in lower display.
3. Press PAGE to exit- controller is locked out.
4.5.1 Available Communication Settings
Display Baud Rate Parity Data Bits Stop Bits
3.o.7 300 odd 7 2
6.o.7 600 odd 7 2
12.o.7 1200 odd 7 2
24.o.7 2400 odd 7 2
3.n.8 300 none 8 1
6.n.8 600 none 8 1
12.n.8 1200 none 8 1
24.n.8 2400 none 8 1
4.6 PID Tuning Constants
The PID tuning constants have been factory set for optimum performance. Altering these
parameters will void the warranty and will require assistance from LumaSense to restore it.