LumaSense Technologies MC320 Manual - Manual (Page 5)

MC320 Thermal Imager Manual General Information 5
1 General Information
1.1 Information about the User Manual
Congratulations on choosing the high quality and highly efficient
LumaSense MC320 Thermal Imager.
This manual provides important information about the
instrument and can be used as a work of reference for installing,
operating, and maintaining your MC320 Thermal Imager. It is
important that you carefully read the information contained in
this manual and follow all safety procedures before you install or
operate the instrument.
To avoid handling errors, keep this manual in a location where it
will be readily accessible.
1.1.1 Legend
Important Notes
The note symbol indicates tips and useful information in
this manual. All notes should be read to effectively
operate the instrument.
Warnings and Cautions
The general warnings and cautions symbol signifies the
potential for bodily harm or damage to equipment.
1.2 Operator Training
To best understand and utilize the measurements and images
derived from the operation of this instrument, the operator
should understand the basics of heat transfer and infrared
radiation theory. Notes on these basics can be found in Section 4
of this manual. Qualified personnel should provide education and
training in these subjects.
1.3 Regulatory Information
This section describes how the Infrared camera complies with
regulations in certain regions. Any modifications to the Infrared
camera not expressly approved by the manufacturer could void
the authority to operate the Infrared camera in these regions.
Caution:
The MC320 instrument is
a sealed unit. Do not
attempt to open the
instrument housing as
this will void the
LumaSense warranty.
Please refer to the
warranty statement
found in Section 1.5 of
this manual.