LT Security LTD831J5 - Manual (Page 49)

49
4/8/16CH Triplex DVR
Digital Video Recorder
“ YES” to enable the network client function.
“X NO” means there is no network client available.
7.3.3. Video Transmission Quality
Setup the quality of Video Transmission as High, Normal or Low.
7.3.4. Audio Transmission
ON”: Enable or “X OFF”: Disable audio tra smission
7.3.6.
7.3.2. Accept Client
“ n
7.3.5. Port
Assign a communication port (a series of number).
IP Address Setup
The IP address acts as a locator for one IP device to find another and
interact with it.
There are two kinds IP types: Static IP address and Dynamic IP address
(DHCP and PPPoE) for selection.
Static IP Address: When a compute
time it connects to the network, it is known as a Static IP address
esses are manually assigned to a computer by an
 DHCP: With dynamic IP addresses, where an IP address is
automatically assigned to a computer by a remote server which is acting
as a Dynamic Host Configuration Protocol (DHCP) server
 PPPoE: Dialup and some broadband networks do not use DHCP, but
instead use the dynamic IP addressing capability of the Point-to-Point
Protocol over Ethernet.
 GATEWAY: Gateway IP address, please check with your M.I.S staff or
administrator to enter the setting.
Subnet mask is a range of logical addresses that is
your M.I.S staff or

r uses the same IP address every
Static IP addr
administrator
 SUBNET MASK:
assigned to an organization. Please check with
administrator to enter the setting