Video loss alarm, Motion setup – LT Security LTD831J5 User Manual
Page 39
39
4/8/16CH Triplex DVR
Digital Video Recorder
5.2. V
o beep whatever video loss or not.
ideo Loss Alarm
To select or specify the channel for detection.
“Mute”: N
“
Buzzer-Short”: Beep shortly by buzzer on main board when video loss.
“
Buzzer-Long”: Beep long by buzzer on main board when video loss.
“
Alarm-Short”: Beep shortly by speaker of system when video loss.
“
Alarm-Long”: Beep long by speaker of system when video loss.
5.3. Motion Setup
5.3.1. Motion Mode
To select the motion sensitivity scale as “Sensitive OFF”, “Sensitive Low”,
“Sensitive Normal”, “Sensitive High” or “Sensitive Highest”.
“Sensitive OFF”: No sensitivity
e Low”: Low sensitive level
“Sensitive High”: High sensitive level
“Sensitive Highest”: The highest sensitive level
5.3.2. Record Time
To set the motion’s record time as 5sec, 10sec, 15sec, 20sec, 25sec,
30sec, 45sec, 60sec, 90sec, 120sec, 150sec or 180sec
5.3.3. Alarm Mode
“Mute”: No beep whatever detecting.
“Sensitiv
“Sensitive Normal”: Normal sensitive level
“
Buzzer-Short”: Beep shortly by buzzer on main board when
detection is active
“
Buzzer-Long”: Beep long by buzzer on main board when detection
is active
“
Alarm-Short”: Beep shortly by speaker of system when detection is
active
“
Alarm-Long”: Beep long by speaker of system when detection is
5.3.4. Alarm Time
To Setup the time period of beep by “Nonstop”(no stop), 5sec, 10sec,
15sec, 20sec, 25sec, 30sec, 35sec, 40sec, 45sec, 50sec, 55sec or 60sec
active