LT Security LTD831J5 - Manual (Page 33)

33
4/8/16CH Triplex DVR
Digital Video Recorder
3.3. Record Channel
To set the channel been selected at “Channel Number” to be recorded or not.
“ON” – recording, “OFF”- No recording.
It can be setup each channel separately by choosing the dedicated channel at
“Channel Number”. Or to choose ” / / ” for all channels.
3.4. Hidden Channel
Set the channel been selected at “Channel Number” to display on screen or not.
But it does not matter with recording mode.
en the channel on screen you choose, Channel Number color turns
to grey. The recording function is acting.
“OFF”- Not hidden
It can be setup each channel separately by choosing the dedicated channel at
“Channel Number”. Or to choose ”
“ON” – Hidd
/ / ” for all channels
3.5. Channel Name
To specify the channel name with 24 characters (max.)
Press “ ” (Play) :There are several channel name: “Room”, Hall”, ” Door”, “Lift”,
“Area”, “Floor”, “Entry”, “Point” for use.
Or you can define the name by using keyboard, controls on front panel or buttons
 / ) – move up / move down, /(/): move left /
ress ”
” to select as
on IR remote:  /  (
move right to the character would like to be selected and p
shown at following figure. The channel name will show on the top of each channel
3.6.
c.
3.7.
Brightness: Press “
” button to change (1~20). Default is 10
” button to change (1~20). Default is 10
e (1~32). Default is 16
Rotation Time
To setup how long to display each channel on full screen from 2~30se
Color Adjustment

 Contrast: Press “
 Hue: Press “” button to change (1~32). Default is 16
 Saturation: Press “” button to chang