LT Security LTD831J5 - Manual (Page 15)

15
4/8/16CH Triplex DVR
Digital Video Recorder
Inst Inst allation allation
Be sure there is no power connection before starting installation!
1. Install the disk drives
There are two spaces for disk drives installation on the DVR: One front accessible R/W
CD-ROM/DVD-ROM (or removable HDD drive) and one internal 3.5” hard drives with
IDE (default) or SATA interface.
Set the HDD (installed with OS/DVR software) jumper into “Master” to make sure all
operating will be normal. The other HDD would be set to “Slave”.
1.1. Install the removable disk drive on the front panel
Step1: Unlock the removable disk drive and slide out the HDD tray.
Step2: Remove the HDD tray’s cover. Put one HDD drive into the tray and
well-connect the cable to HDD drive on the rear side of the tray.
Setp3: Fix four screws on both sides, put the cover back and slide back the HDD
tray.
1.2. Install the internal disk drives (IDE interface) for 4/8CH DVR
the Step1: Unscrew three screws on DVR’s rear panel. Then slide backward
chassis’s top cover and move it upward