LT Security PTZ217X12 Installation Manual - Manual (Page 28)

Installation Manual of 4-inch Speed Dome
19
Figure 3-8 Drill Template
2. Dissemble the speed dome.
1) Loosen three screws as shown in the following figure.
2) Remove the lower dome.
Figure 3-9 Dissemble the Speed Dome
3. Install the toggle bolts.
1) Remove the toggle from the toggle bolt.
2) Insert the bolts into the screw holes on the dome as shown in Figure 3-10.
3) Rotate the bolts through the screw holes.
4) Reinstall the toggles as shown in Figure 3-11.
Three Screws