LT Security LTD2508SE - Manual (Page 75)

DVR User Manual
69
Step5
：Input the server’s address, ID and password respectively in the columns of “Server”, “User” and “Password”, and click “Go”
to log on the server. It will show the picture if access successfully. Refer below picture in the left:
Step6
：Camera 1 is the default channel after login. Change the channel in rolling-down menu of “Channel”: refer below picture in
the right:
8.2 By Phones with Symbian
Please use the smart phones with symbian version supported by this unit. The detail information is as follows:
Symbian S40 support
Symbian UIQ support
Symbian S80 support
Symbian S60 support
Symbian S60 3
rd
Edition-Symbian OS v9.1 support
Symbian S60 3
rd
Edition with FP 1-Symbian OS v9.2 support
Symbian S60 3
rd
Edition with FP2-Symbian OS v9.3 support
Symbian S60 5
th
Edition-Symbian OS v9.4 support
Symbian S60 5.1 Edition-Symbian OS v9.5 support
Step1
：Firstly enable the network access on mobile phone. Then run Web browser.
Notice: User name and
password here are the same
with that used on the DVR.
The default is admin and
123456.