LT Security LTD2508SE - Manual (Page 60)

DVR User Manual
54
Step 2: Enter into Network interface and then click “Ethernet Connected” to check the internet connection of Apple PC.
Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR’s Main Menu SetupNetwork
interface to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network
segment should be the same as the PC. If using DHCP, please enable DHCP in the DVR and router.
Step 4: After finishing the above information, users can enter LAN IP and http port in the Safari browser. For example: input
http://192.168.1.100:81(here 192.168.1.100 is LAN IP of DVR, 81 is the http port of DVR). Click “
”button, the browser
will download Active X control as shown below: