LT Security LTD2508SE - Manual (Page 27)

DVR User Manual
21
Setup mask area live image mask area
4.3 Record configuration
Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp and snap.
4.3.1 Enable
Step1: enter into system configuration record configurationenable; refer to Fig 4-11:
Step2: tick off record, audio and record time
Step3: user can setup all channels with same parameters.
Tick off “all” to do relevant setup.
Fig 4-11 record configuration-enable
Parameter Meaning
Record Record switch of every
channels
Audio Enable live record audio