Before drag after drag, Recycle record, Snap – LT Security LTD2508SE User Manual

Page 30: Schedule configuration, Schedule, 5 recycle record, 6 snap, 4 schedule configuration, 1 schedule

DVR User Manual

Before drag after drag

4.3.5 Recycle record

Step1: enter into system configuration

record configurationrecycle record;

Step2: tick off recycle record to enable the recycle record function. It will cover the earlier recorded files and keep recoding when
HDD is full; if user disenables this function, it will stop recording when HDD is full.
Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current
interface.

4.3.6 Snap

In this interface, user can set up Resolution, quality, snap interval and snap number.

4.4 Schedule configuration

Schedule configuration includes three sub menus: schedule, motion and alarm.

4.4.1 Schedule

The volume means the seven days of a week from Monday to Sunday and the row means 24 hours of a day. Click the grid to do
relevant setup. Blue means checked area and gray means unchecked area.
Step1: enter into system configuration

schedule configurationschedule; referring to Fig 4-15:

This manual is related to the following products:

LTD2516HC