LT Security LTD2508SE User Manual

Page 57

DVR User Manual

after IP address or domain name.
Step 6: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name
and password correctly, and enter to view.

Note: If you cannot download and install ActiveX, please refer to Appendix A

Q8.

2. Connect the DVR to internet directly.
Step 1: Enter into the DVR’s Main Menu

SetupNetwork interface to enable PPPoE and then input user name and

password received from your ISP. Next, click ‘Apply’. The DVR will connect to the server and would give a confirmation
message.
Step 2: When accessing the remote interface of DVR, user can input WAN IP to access directly (user can enter into Main
menu

InformationNetwork interface to check IP address). The browser will download Active X control

Step 3: The following setting steps are as the same as Step4, Step 5 and Step 6 in Point 1.

Fig 7-1 View with IE browser

This manual is related to the following products:

LTD2516HC