LT Security LTD3446HT - Manual (Page 21)

>>Stand-alone DVR User Manual
20
Pic.20 Progress bar
Press left or right button to adjust parameter values, press UP or DOWN button to switch
parameter type, press PGUP or PGDW to switch channel
d) CH MASK：Select to shield this channel
e) PTZ setting：Enter PTZ setting interface
Pic.21 PTZ SET
PTZ SET ： In this page, you can choose protocol of PTZ which associate with this channel, the
baud rate and PTZ ID code. Default PTZ ID code is same as the number of channel that the
PTZ associated with.
PTZ CTRL：Press this button to enter PTZ control interface. You can control it via operation
panel. In this interface, you can set and call the preset point, can control the PTZ
UP/DOWN/LEFT/RIGHT run, can control the zoom, focus and aperture ,can control the PTZ
cruising.
f) Apply to all CH.：choose this item and press confirm, you can copy this channel setting to
others channel.
3.6.3 RECORD SETTINGS
Set the recording bit stream、record mode etc
Pic.22 Record Setting
Recording mode choose：You can choose Manual recording, Timing recording and Alarm recording.