Lincoln Electric IM660 RANGER 200 - Manual (Page 9)

A-1 INSTALLATION
RANGER 200
A-1
TECHNICAL SPECIFICATIONS - Ranger 200 (K1724-1)
Make/Model Description Speed (RPM) Displacement Starting Capacities
System
Kohler 1 cylinder Low Idle 2500 26 cu. in 12VDC Battery & Fuel: 12 gal.
Command (Cast Iron Liner) Starter
CH15 OHV
15 HP @ (426 cc) (Group 58; 435 45.4 L
3600 RPM High Idle 3700 cold crank amps)
Bore x Stroke Battery Charger Oil: 2.0 Qts.
15 A. regulated 1.9 L
Full Load 3500 2.55” x 2.64”
(90 mm x 67mm) (Push Button Start)
INPUT - GASOLINE ENGINE
RATED OUTPUT - WELDER
HEIGHT WIDTH DEPTH WEIGHT
30.00 in. 21.50 in. 42.25 in. 409 lbs.
762.0 mm 546.0 mm 1073.0 mm 186 kg.
LUBRICATION VALVE LIFTERS FUEL SYSTEM GOVERNOR
Full Pressure Hydraulic Mechanical Fuel Pump Mechanical Governor
with Full Filter 5% Regulation
AIR CLEANER ENGINE IDLER MUFFLER ENGINE PROTECTION
Duel Element Automatic Idler Low noise Muffler: Top outlet Shutdown on low oil
can be rotated. Made from pressure.
long life, aluminized steel.
ENGINE WARRANTY: 2 year unlimited hours (See engine manufacturer warranty for details.)
OUTPUT - GENERATOR
Welding Output Volts at Rated Amps Duty Cycle Max. OCV @ 3700 RPM
CC DC Constant Current 210 amps 25 volts 100% 80 volts RMS
CC Output Range 40 to 210 amps
Auxiliary Power 1
6,000 Watts, 60 Hz
120/240 Volts
100 % Duty Cycle
PHYSICAL DIMENSIONS
ENGINE COMPONENTS
1. Output rating in watts is equivalent to volt-amperes at unity power factor. Output voltage is within ± 10% at all loads up to
rated capacity. When welding, available auxiliary power will be reduced.
Cooling System:
Air-Cooled